Izdelki za stroji za izdelavo (1318)

Nossa máquina de bolo de arroz SYP (Máquina de padaria) é projetado de tal forma que ele pode produzir Snack de grão Popping / Chip / Cracker / Cake usando grãos 100% naturais. Atualmente dispositivos mecânicos estão sendo feitos, mas não é capaz de lidar com a alta pressão continuamente e produz produtos não uniformes. Suas peças, como correntes e motores são desgastados facilmente e provoca quebras freqüentes. Nossa máquina de bolo de arroz 'SYP' corrigiu essas falhas e usa hidráulica para produzir produtos uniformes e aumentou significativamente sua durabilidade. Além disso, a variedade de moldes estão disponíveis em diferentes tamanhos e formas para satisfazer as necessidades do cliente. Máquinas pequenas podem ser produzidas para lojas locais e máquinas maiores podem ser produzidas também para fábricas. Para maiores informações entre em contato conosco !! Obrigado

High-performance, even for small cross-sections. Cutting force, high volume output and advanced sensor technology make the Kappa machines the number one choice for automated cutting and stripping, even for smaller wire cross-sections. The machines can be used very efficiently thanks to their simple, intuitive control elements. The Kappa product family stands out thanks to its extremely broad processing range. Its intuitive and simple operation and controls allow you to easily set up even difficult-to-process materials, with extremely fast tool-free changeover to new types of wires. The intuitive TopTouch operating software guides the user through the process logically. During production, operators have maximum transparency thanks to simple adjustment settings for important parameters. This makes the Kappa machines especially intuitive and safe to operate. Wire cross-section, stranded wires:0.05 – 10 mm² AWG 30 – 8 Max. outer diameter:10 mm (0.4 in.) Length accuracy:Repeat accuracy ± (0.2 % + 1 mm (0.04 in.) Flat cable processing:Optional 12 mm (0.47 in.) Wire length range:1 – 800’000 mm (0.039 in. – 874.9 yd.) Short wire lengths:Optional 30 mm Max. wire transport speed:4.0 m/s (157.5 in./s) Max. stripping lengths (Full strip):Side 1: 100 mm (3.94 in.) ; Side 2: 40 mm (1.57 in.) S Max. stripping lengths (Semi strip):Side 1: 999.9 mm (39.37 in.) ; Side 2: 999.9 mm (39.37 in.) Max. stripping lengths (Multi-step strip):Side 1: 999.9 mm (39.37 in.) ; Side 2: 999.9 mm (39.37 in.) Length measurement system:Optional Straightening unit:Optional IOCS interface (expandable):2 (4) USB/ethernet:Standard Noise level:< 70 dBA Drive system (with motorized closing axis):Single roller Production table:Optional Electrical connection:110/230 VAC ±10% 50/60 Hz 300 VA Pneumatic connection:Optional for blade cleaning Dimensions (W × H × D):20 × 15 × 18.5 in

CNC-Frästeile aus Kunststoff

Die CNC-Bearbeitung bei RPWORLD erfüllt die unterschiedlichen Bedürfnisse der Kunden, die von Einzelteilen bis hin zur Produktion kleinerer bis mittlerer Stückzahlen reichen. Unsere CNC-Maschinen laufen rund um die Uhr und stellen sicher, dass Ihre hochpräzisen Teile mit komplexen Geometrien in nur 3 Tagen geliefert werden. Wir verfügen über 3-Achsen-, 4-Achsen- und 5-Achsen-Maschinen, Bohrmaschinen, Drehmaschinen und Erodiermaschinen, die für die Herstellung komplexer Formen mit hoher Präzision ausgelegt sind. Die hochmodernen Maschinen bieten enge Toleranzen DIN ISO 2768 mittel (fein) und einen großen Bearbeitungsbereich von 1 mm bis 1600 mm. Angewandte Branchen: - Herstellung medizinischer Geräte - Automobil - Wissenschaftliches Instrument - Maschinenbau - Roboter - Design Industrien angewandt:medizinisches Gerät Industrien angewandt:Wissenschaftliche Instrumente

Our company has 25 years experience for manufacture different kinds of gears.And our company has many advanced production equipments. such as CNC forming grinding wheel grinding machines, gantry machining centers, four axis and five axis machining centers, CNC lathes, CNC gear shapers, CNC milling machines, CNC hobbing machines, gear chamfering machines.and more than 40 sets of processing and testing equipment. we can provide various professional production services such as precision gear wheel machining, CNC machining, CNC turning machining, and so on.

Kundenspezifische Bearbeitungsdienste für CNC-gedrehte Aluminiumteile in China, hochpräzises CNC-Drehen, Fräsen, Bohren, Gewindeschneiden für Aluminiumteile, hochwertige Oberflächenbehandlungen. Hochwertige und hochpräzise Dreh- und Frästeile aus Aluminium erfüllen die Anforderungen aller Lebensbereiche. Hauptsächlich werden Aluminiumteile für optische Instrumente, dekorative Aluminiumteile, Aluminiumteile für Elektrogeräte usw. verarbeitet. sales@mxmparts.com www.mxmparts.com WhatsApp: +86 13780014913

2008'den beri Türkiye İzmir'de bulunan fabrikamızda çeşitli ham maddeleri CNC talaşlı imalathanemizde üretimi yapıp çeşitli ülkelere ihracatını yapmaktayız.

AIM 7510 is 5-axis servo controlled machining center which is designed to perform drilling, grooving, notching, taping, saw milling, etc. on all kinds of aluminum & PVC profiles, light alloys in general and thin walled steel profiles. Efficient and economic processing on the six sides of the profiles is possible with this fully automatic machining center. The moveable turret type of tool magazine equipped with12 standard tools provide a fast tool change.It is housed in the mobile gantry to minimize the tool change time. An additional magazine for the saw blade with 350 mm dia. ensures the ease of machining on the exterior applications of the profiles. The machine can be used in tandem mode, a work method that allows machine stop times to be reduced to a minimum as it allows workpiece change time (loading/unloading) to be run “while the machine is operating. Automatic clamp recognition and clamp positioning is available.

Die Leistungspalette unserer mechanischen Fertigung ist auf die Herstellung von CNC Dreh-und Frästeilen für die Medizin- und Elektrotechnik sowie Maschinenbau und Halbleiterindustrie ausgerichtet. Vom Einzelteil bis zur Serie fertigen wir CNC-Drehteile, CNC-Frästeile, 3D-Druckteile in sämtlichen gängigen Werkstoffen. Gerne übernehmen wir auch die Montage für Sie. Made in: Germany

Die neue Generation der BOLTMARK ® II Drucker wurde im Bezug auf Funktionalität und Zuverlässigkeit nochmals aufgerüstet. Unsere Ingenieure haben ein Produkt entwickelt, das Sie auch unter härtesten Bedingungen nicht im Stich lässt und zudem sehr effizient arbeitet. Der extrem niedrige Stromverbrauch (nur 19 W) schafft eine neue Qualität im CIJ-Druckersegment. Mit ihrem niedrigen Verbrauch an Tinte und Solvent sind die Drucker der BOLTMARK®-II-Serie führend unter den umweltfreundlichen und wirtschaftlichen Markiergeräten. Einfache Wartung - iModule® Die EBS BOLTMARK II Serie ist mit einem integrierten Farbsystem ausgestattet, das in 3 einfachen Schritten und in weniger als einer Minute gewechselt werden kann: Klappe öffnen, gebrauchtes iModule® entfernen, neues iModule® einsetzen - KLICK - FERTIG! Kein Techniker und kein Werkzeug erforderlich. Ebenso funktioniert der schnelle Wechsel von Tinten- und Lösungsmittelflaschen. Technologie:Continuous Ink Jet Druckhöhe:max. 32 Punkte Textspeicher:bis zu 1000 Plätze IP Schutzklasse:IP 55 (IP 65 optional) Gewicht:12,5 kg Stromverbrauch:19 W Schreibgeschwindigkeit:500 Meter / Minute Länge Schreibkopfkabel:3m (6m optional)

Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, etc. Surface treatment: Customer's Request, color anodizing Drawing Format: 2D/(PDF/CAD)3D(IGES/STEP) Tolerance: Customer's Drawing Request, ±0.01-0.02

Precision Ceramics is a Shapal Distributor. Precision Ceramics is a Shapal Expert. In fact, there is no other Shapal Supplier who knows more about this unique machinable ceramic than Precision Ceramics. We’re simply experts in everything Shapal.

ANIS Trend manufacturers machines and systems ranging from channel baling presses, conveyor belts, dosage systems and other products for waste compaction represents special solutions which are designed and manufactured according to your individual requirements.

Machining is a manufacturing process that involves removing material from a workpiece to create a desired shape or finish. Machining is used to create a wide range of products, including automotive and aerospace parts, consumer electronics, and tools. The process can be performed manually or using known as CNC machines, which can execute complex cutting operations with high precision and consistency.

Dank fortschrittlicher CAD-/CAM-Arbeitsplätze und modernster Werkzeugmaschinen können wir jederzeit kurzfristig und flexibel auf die Wünsche unserer Kunden reagieren.

Nous avons une large gamme de mélangeurs simple et double bras en Z ZM200 – ZM500 – ZM EVO500 ZM 8001100 Ce sont des mélangeur horizontaux à grande vitesse qui conviennent aux types de pâte molle et dure. Chargement des matières premières manuellement ou automatiquement en option. Mélangeur équipé d'un moteur à double vitesse (3570 tr / min) avec passage automatique entre haute et basse vitesse, cycles de travail programmables à travers un panneau de commande électromécanique intégré dans le châssis de la machine La décharge de la pâte se fait en inclinant la cuve du mélangeur à travers un piston hydraulique. Machine fabriquée dans le respect des règles d'hygiène et de sécurité.

etc. metals are carefully manufactured with our 7 ton casting capacity (in one pot). In our R&D unit, within our structure, products suitable for your demands are started drawing, design and processing with your final approval. The control of drawing, design, casting and labor costs control by us. That's the basis of to produce quality products.

lütfen tüm ürünlerimiz için web sitemizi ziyaret ediniz: www.elpas.com.tr

28 yıllık tecrübemizle plastik-metal enjeksiyon kalıpları, alüminyum enjeksiyon kalıpları, saç metal kalıpları ve talaşlı imalat imalatı yapmaktayız. Makine parkurumuzda bulunan CNC makinelerinde yarı mamul parça işliyoruz. Ayrıca otomotiv yedek parça, konteyner aksamları, şaft, tarım makine parçaları, valf-pompa yedek parçaları ve daha bir çok sektöre yarı mamul üretimi yapan talaşlı imalat firmasıyız.

A Periplast projeta e fabrica ferramentas para fabricação de tubos de PVC em vários tamanhos e versões, incluindo incluindo a distribuição do fundido por helicóide, configurações de fluxo direto ou cruzado. Tubos de monocamada de PVC com um Dext que varia de 25 a 1000 mm. Tubos multicamadas com 2 camadas com um Dext até 75 mm

MANUFACTURING & MACHINING OF TURBO COMPRESSOR BASEPLATES

Mit unserem modernen Maschinenpark und dynamischen Team bieten wir Ihnen hochwertige Bauteile bei geringen Lieferzeiten. Bearbeitungsgrößen von 4000x1600mm im 5 achsigen CNC bereich sind möglich.

Components for electric bikes

turnkey manufacturing","China turnkey service","turnkey manufacturing service NO:China Turnkey Manufacturing Service

Effiziente 5-Achs-Fräsbearbeitung durch Automatisierte Bearbeitungszentren durch Einssatz von Palettenwechsler, Palettenspeicher, Zusatzmagazine und Handlingsystem

Der Typ EVM 200 ist eine Eckverbindungsmaschine für die rationelle Fertigung von Fenstern und Türen aus Alu bzw. AluKunststoffprofilen. Der Aufbau und die Wirkungsweise der Maschine entspricht im Detail der bewährten Konstruktion unserer EVMReihe.

Suitable also for welding precision mechanical parts and medical technology components as well as for the manufacture of sensors and electrical components The ALS 100 is an ergonomic workplace The spacious work chamber offers a very brightly lit work area and is loaded via two side doors. The average power of 100 W enables a fast pulse sequence (up to 25 Hz) and thus fast work even at high energy settings. The homogeneous fusion of the materials results in welding results of the highest quality. The laser is used in the manufacture and repair of jewelry, in precision engineering or when welding sensors

Wir sorgen durch jahrelange Partnerschaften mit verschiedenen Presswerken für eine über Rahmenverträge geregelte Preisstabilität und Liefertreue. Unsere langjährige Erfahrung in der Komplettbearbeitung von Aluminiumprofilen erlaubt es uns, Sie in der Weiterentwicklung bestehender Profile und der Entwicklung der von Ihnen spezifizierten Neuprofilen zu unterstützen. Egal, ob funktionelle Massenware oder Präzisionsteile mit hoch dekorativer Oberfläche, wir fertigen Ihr Produkt nach Ihren Vorgaben.

Production with Material (Manufacturing) : Our company provides the material needed for the manufacturing of the requested part. After engraving and doing quality control in accordance with the technical drawing measurements, our company ships the buying company the product with final reports. ⦁ Production without Material (Engraving) : Buying company provides the material themselves and sends it to our company. This could be casting or any type of material. Materials that arrive to our company are first controlled in terms of their measurements. When they are approved, our company prepares a manufacturing plan/program and starts working on specimens. Part with taken specimens are delivered to the buying company. With the approval of the buying company, manufacturing begins, and after doing its quality control it is delivered to the buying company with its final measurement reports.

Contract Manufacturing TC Domine is a dependable partner for the highprecision machining of components made of thermoplastics and glass fibre or carbon fibrereinforced plastic. Six modern CNC machines with up to five axes can machine components 6,140 mm long, 1,900 mm wide and up to 500 mm high. As such, we are able to design and manufacture the necessary parts inhouse. Subsequent processing steps such as gluing, painting and assembling addon components are an integral part of what we do.